If you are facing issues while accessing the Linksys RE6500 setup page for your extender, then this post will prove helpful to you. All you have to make sure to follow the troubleshooting tips given here in exact order to get the job done. Let’s get the ball rolling!

Note: Prior to going through the troubleshooting steps given below, make sure that you have seen the RE6500 Linksys extender manual once.

Now, let’s take the plunge to fix the issue within minimal of time.

Fix: Facing Issues While Accessing the Linksys RE6500 Extender Setup Page

Use the Correct Web Address

Extender.linksys.com is the default web address used for setting up Linksys extender of any model. However, users face issues while accessing the default web address. This happens because users make mistakes while entering the web address. If the same issue persists with you as well, then make sure to enter the web address correctly (without typos) in the browser address bar.

Note: Typos in the URL will redirect you to some other website instead of the RE6500 setup page. So, be very carefully while using the web address.

Follow the Correct Linksys Extender Login Steps

Are you following you the correct steps for logging into your Linksys extender? If you are not sure, then don’t worry. We’ve got you covered! Simply have a look at the steps required to access the Linksys extender login page.

• Power up your Linksys RE6500 WiFi range extender. Also, be sure to place your RE6500 device in reach of your existing router’s WiFi signals.

• Turn on your PC or laptop as well.

• Load up any internet browser of your choice.

• Carefully type extender.linksys.com into the browser’s URL bar.

• Hit Enter.

• You are now redirected to the Linksys extender login page.

• Input the extender’s password or network key.

• Hit on Log In.

Update Your Internet Browser

Use of an outdated internet browser on your device also results in the issue. So, before getting into the Linksys extender setup page, check whether the web browser you are using is up-to-date or not. In case not, consider updating the web browser and fix the issue on your own.

If your web browser is already up-to-date, then clear all the junk and browsing history from your internet browser – close all the unwanted tabs restart your PC or any other device you are using and try again.

Use an Uninterrupted Internet Connection

While accessing the Linksys RE6500 setup page, make sure that you are connected to Linksys extender setup-xxx securely. Therefore, it is also suggested – do not use neighboring WiFi or public WiFi to access the Linksys RE6500 extender login and setup page. On the off chance that you are connected to some other unknown WiFi network, then it is obvious to face issues while accessing the Linksys extender setup page.

Let the LED on your Linksys RE6500 Extender Become Stable

Once you power up your Linksys extender, the power LED on it will start blinking. You have to wait for some time for the LED on your RE6500 device to become stable. Once the power LED on the device become stable, you can connect it to your router’s WiFi network – open a web browser and navigate to the extender’s setup page via web address mentioned above.

Just in case the web address i.e. extender.linksys.com is not working for you, then you can also use the RE6500’s default IP address as a URL.

Wrap Up

In this way you can fix the issue you are facing while accessing the Linksys RE6500 extender setup page. In the event that you are still baffling with the same trouble, then without any delay, reach out to our technicians through the comments section and get the issue fixed in no time.